TECHNICAL DATA SHEET

QUICK DRYING ZINC PHOSPHATE SEMI-GLOSS FINISH - REF: - 53L17

A quick drying zinc phosphate paint suitable for over coating blast cleaned steel.  Specially formulated to enable 75 microns dry film thickness to be achieved in a single coat application.  Suitable for application by airless spray.

 

                PACKAGE SIZE                                                                                5 Litre, 25 Litre

 

COLOUR                                                                                             Red Oxide, Light Grey.

 

                FLASH POINT                                                                                  22°C - 32°C

 

                DRYING TIME @ 20°C                                                                   Surface Dry: 20 - 40 mins

 

                VOLUME SOLIDS                                                                            39% (+/- 2%)

 

                RECOMMENDED W.F.T.                                                              214 microns

 

                RECOMMENDED D.F.T.                                                              75 microns

 

                THEORETICAL SPREADING RATE                                        6 Sq. Metres/Litre

 

                THINNERS                                                                                        No. 1

 

                SHELF LIFE                                                                                       12 mths

 

                V.O.C.                                                                                                    502 g/litre

 

SURFACE PREPARATION

 

Ensure surface is free from rust, moisture, oil or other surface contamination.  Blast clean to BS 4232:1967 or Second quality - Swedish standard 2.5.

 

APPLICATION

 

AIRLESS SPRAY               Nozzle Size 18-21 thou, Fan Angle - 80°, Tip Pressure 2000-2500 p.s.i.

 

HEALTH & SAFETY

Refer to M.S.D.S. prior to use.  Xylene Based Products

 

Provide adequate ventilation.  Prolonged skin contact inhalation of vapour must be avoided.  Eye contamination  - Flush with eyewash or warm water for 10 mins.  Clean hands after use.

 

Any person or company using this product without first making enquiries as to the suitability for the intended purpose does so at their own risk, and Fiesta Industrial Paints Ltd can accept no liability for the performance of the product or for any loss or damage arising out of such use.

FIESTA INDUSTRIAL PAINTS LTD

BURNLEY ROAD, HAPTON LANCS BB11 5QR

TEL:01282 775639/FAX:01282 776406