TECHNICAL DATA SHEET

QUICK DRYING SEMI-GLOSS DIPPING PRIMER - REF: - 53L19

A quick drying zinc phosphate paint suitable for over coating cleaned steel.  Specially formulated for dip application but can be applied by spray.  Dependant upon the smoothness of the steel a dry film thickness of 30 microns will give three months temporary protection prior to subsequent over coating.

 

                PACKAGE SIZE                                                                                5 Litre, 25 Litre

 

COLOUR                                                                                             To Order.

 

                FLASH POINT                                                                                  22°C - 32°C

 

                DRYING TIME @ 20°C                                                                   Surface Dry: 20 - 40 mins

 

                VOLUME SOLIDS                                                                            30% (+/- 2%)

 

                RECOMMENDED W.F.T.                                                              100 microns

 

                RECOMMENDED D.F.T.                                                              30 microns

 

                THEORETICAL SPREADING RATE                                        10 Sq. Metres/Litre

 

                THINNERS                                                                                        No. 1

 

                SHELF LIFE                                                                                       12 mths

 

                V.O.C.                                                                                                    502 g/litre

 

SURFACE PREPARATION

 

Ensure surface is free from rust, moisture, oil or other surface contamination. 

 

APPLICATION

 

DIP

 

HEALTH & SAFETY

Refer to M.S.D.S. prior to use. Xylene Based Products

 

Provide adequate ventilation.  Prolonged skin contact inhalation of vapour must be avoided.  Eye contamination  - Flush with eyewash or warm water for 10 mins.  Clean hands after use.

 

Any person or company using this product without first making enquiries as to the suitability for the intended purpose does so at their own risk, and Fiesta Industrial Paints Ltd can accept no liability for the performance of the product or for any loss or damage arising out of such use.

FIESTA INDUSTRIAL PAINTS LTD

BURNLEY ROAD, HAPTON LANCS BB11 5QR

TEL:01282 775639/FAX:01282 776406