TECHNICAL DATA SHEET

QUICK DRYING MACHINERY ENAMEL - REF: - 53L21

A quick drying machinery enamel suitable for use in most industrial environments.  The rapid drying properties of this product enable early handling of painted products.

 

                PACKAGE SIZE                                                                                5 Litre, 25 Litre

 

COLOUR                                                                                             BS 4800, BS 381C, R.A.L.

 

                FLASH POINT                                                                                  22°C - 32°C

 

                DRYING TIME @ 20°C                                                                   Surface Dry: 20 - 40 mins

 

                VOLUME SOLIDS                                                                            35% +/-  2%

 

                RECOMMENDED W.F.T.                                                              75 microns

 

                RECOMMENDED D.F.T.                                                              30 microns

 

                THEORETICAL SPREADING RATE                                        10 Sq. Metres/Litre

 

                THINNERS                                                                                        No. 1

 

                SHELF LIFE                                                                                       12 mths

 

                V.O.C.                                                                                                    519 g/litre

 

SURFACE PREPARATION

 

Ensure surface is free from rust, moisture, oil or other surface contamination.

 

APPLICATION

 

AIRLESS SPRAY               Nozzle Size 13 thou, Fan Angle - 80°, Tip Pressure 2000 p.s.i.

 

CONVENTIONAL           Nozzle Size 50 thou, Atomising Pressure 50 p.s.i., Fluid Pressure 10 p.s.i.

SPRAY

 

HEALTH & SAFETY

Refer to M.S.D.S. prior to use. Xylene Based Products

 

Provide adequate ventilation.  Prolonged skin contact inhalation of vapour must be avoided.  Eye contamination  - Flush with eyewash or warm water for 10 mins.  Clean hands after use.

 

Any person or company using this product without first making enquiries as to the suitability for the intended purpose does so at their own risk, and Fiesta Industrial Paints Ltd can accept no liability for the performance of the product or for any loss or damage arising out of such use.

FIESTA INDUSTRIAL PAINTS LTD

BURNLEY ROAD, HAPTON LANCS BB11 5QR

TEL:01282 775639/FAX:01282 776406