TECHNICAL DATA SHEET

SINGLE PACK ZINC RICH PRIMER - REF: - 65L001

A primer containing metallic zinc pigment to provide superior anticorrosive properties.  The zinc content (90% zinc by weight in the dry film )  creates cathodic protection for the steel in the event of damage to the film.  Ideal for use over blast cleaned steel or as a repair for Inorganic Zinc Rich priming systems.  It may be over coated with a wide range of products including Epoxy, Chlorinated Rubber, Vinyl and Urethane topcoats.

 

                PACKAGE SIZE                                                                                2.5 Litre

 

COLOUR                                                                                             Metallic

 

                FLASH POINT                                                                                  22°C - 32°C

 

                DRYING TIME @ 20°C                                                                   Surface Dry: 20-30mins

 

                VOLUME SOLIDS                                                                            40%

 

                RECOMMENDED W.F.T.                                                              100 microns

 

                RECOMMENDED D.F.T.                                                              40 microns

 

                THEORETICAL SPREADING RATE                                        10 Sq. Metres/Litre

 

                THINNERS                                                                                        No. 1

 

                SHELF LIFE                                                                                       12 mths

 

                V.O.C.                                                                                                    530 g/litre

 

SURFACE PREPARATION

 

Ensure surface is free from rust, moisture, oil or other surface contamination.  Blast clean to BS 4232 1967 or Second quality - Swedish standard SA 2.5.

 

APPLICATION

 

BRUSH                                 Patch priming can be carried out.

AIRLESS SPRAY               Nozzle Size 18-21 thou, Fan Angle - 80°, Tip Pressure 2000-2500 p.s.i.

 

HEALTH & SAFETY

Refer to M.S.D.S. prior to use. Xylene Based Products

 

Provide adequate ventilation.  Prolonged skin contact inhalation of vapour must be avoided.  Eye contamination  - Flush with eyewash or warm water for 10 mins.  Clean hands after use.

 

Any person or company using this product without first making enquiries as to the suitability for the intended purpose does so at their own risk, and Fiesta Industrial Paints Ltd can accept no liability for the performance of the product or for any loss or damage arising out of such use.

FIESTA INDUSTRIAL PAINTS LTD

BURNLEY ROAD, HAPTON, LANCS BB11 5QR. 

TEL: 01282 775639  FAX: 01282 776406